Do you have an old window that requires to be changed? Now I am heading to display you how I am updating an old aluminum window and putting in a new double pane vinyl window in our basement rest room. Thanks to DAP for sponsoring this submit, all views are ours — see our total disclosure coverage listed here.
Our Birch Home is an older home, so we have been executing a great deal of updates to modernize the space. From updating the mantel and fire, to putting in new flooring and a new kitchen area and pantry, to receiving rid of the pink bathtub — it is been a handful of a long time of jobs but it is coming with each other! (We’ve set in a lot of get the job done in the lawn, much too!)
This challenge is in our basement rest room, which we have been functioning on for awhile now. The very last matter we showed you was adding the cement board close to the rest room for the new tile.
Prior to we get much too much extra into the rest room remodel, it was a superior time to swap the old aluminum window with a new double pane vinyl window. The old window was set up in the 50’s and is not extremely vitality productive.
The good thing is, our window isn’t above the self-importance/sink space like this one — but this sliding mirror was a intelligent option if we did have that situation!
Putting in a Window in a Basement Toilet
What is the cost to swap an old window?
$one hundred twenty for the new vinyl Jeldwen window and DAP resources to make it climate tight.
How much time does it choose?
It took us about 3 hours from start out to complete which include
- eliminating the old aluminum window
- cleansing the window space
- putting in the new window
- caulking to make the window climate tight
How to evaluate the for the new window
Evaluate the height and vast on the outdoors and subtract one/4″ to an one/2″. That will give you the ultimate dimensions of the window.
For this new rest room window, I requested a vinyl window without fins on the sides mainly because I was adding wooden trim close to it. It took about a week or extra to pick up the window, mainly because it was a customized order.
Get our guidelines for buying new home windows listed here.
What You will Need: Replacing an Outdated Window in a Basement Toilet
Resources Record
This submit consists of affiliate backlinks. Learn extra and study our total disclosure policy here.
Instruments Required
How to Take away an Outdated Window and Put in a New Window
one. Take away old existing window.
I had to minimize out the frame with a steel reciprocating observed blade. Just after creating the cuts, I applied the hammer to pry it all out.
If you have an old wooden window and can take out it in one piece, listed here are some tips for what to do with old home windows.
2. Cleanse and prep the window space cost-free from dust and debris.
Take away any dirt, dust and old caulk from the old window.
three. Dry in shape new window.
I produced confident that the window I requested in shape in the space. Phew! Evaluate two times, order once!
four. Add wooden trim.
Simply because this window is in the basement concrete wall, I extra redwood trim. We like functioning with redwood mainly because it is a sturdy wooden which is normally rot- and climate-resistant — we use it in almost all our out of doors jobs, from our deck to our new elevated backyard packing contain
ers. (See redwood concrete bench, backyard arbor, and pergola, much too.)
I glued a redwood frame in position with DAP DynoGrip. I desired something to easily to drill into to continue to keep the window in position.
four. Level the window.
I applied a little stage to make confident it was stage in the opening. I was fortunate, mainly because the wooden frame that I produced was just proper and I didn’t need to use shims to stage it.
6. Take a look at window to make confident it opens easily.
Make confident you slide the window open up and closed to check out that it operates just after it is stage.
7. Screw the new window to the wooden frame.
I applied one one/2″ screws to attach the vinyl window to the wooden frame. Just make confident the screw head is a flat head that does not get in the way of the window opening and closing.
Then I lined the screw heads with the caps that appear with the window. It appears great and will make the window monitor a lot easier to continue to keep clear, much too.
6. Seal with foam.
I applied DAP Touch ‘N Foam to shut all the gaps of the window both of those on the inside and outdoors.
7. Seal with Caulk
Just after the foam dried I applied DAP Window Trim Caulk to seal off the outdoors of the window to continue to keep the water out.
Similar Studying: How to Put in Craftsman Window Trim
Now I need to start out functioning on the tile to complete off this rest room! We’re nonetheless choosing on the finishes for this rest room — we could do some enjoyment moroccan design and style fish scale tile like this, or some contemporary hexagon tile… a lot of choices!
Keep tuned for extra rest room remodel to appear — and you can see where this rest room began listed here and how we set up the cement board listed here.
Much more Do-it-yourself window updates:
Similar
