How to Install a Whitewashed Knotty Pine Wood Plank Ceiling

Do you want to update the search of the ceiling in a home in your house?  See how I current our basement ceiling with a whitewashed knotty pine wood plank board.  I will consider you by means of the Diy wood plank ceiling method step-by-step.

You can also insert equivalent character to other locations of your property by adding a wood plank accent wall or wood plank wainscoting, a planked kitchen area island structure, or a plank headboard wall. 

DIY Whitewashed Knotty Pine Wood Plank Ceiling in a Basement

Thanks to DAP for sponsoring this article. All views are ours this article may well comprise affiliate hyperlinks — see our total disclosure coverage listed here.

Diy Whitewashed Wood Plank Ceiling

This ceiling genuinely reworked the search of this home in our house.  We adore how it turned out. We are thinking of undertaking this in other rooms in our house but before we do that I needed to check out how we favored it in this home in the basement.

We experienced previously put in new flooring, so now that we have a new basement ceiling, we just have to do everything in concerning! #youmightbeaRemodelaholic

See the befores of our Jordan house listed here and all the initiatives for this house listed here.

Time Required:

A number of times

Sizing of Challenge:

11′ x 14′ (154 sq. toes) ceiling with part fall down.  This home is beneath the main ground of the house in the basement.

Expense and Supplies:

Neighborhood hardware store price ranges

  • (four) containers 8′ prolonged Knotty Pine Wood V-Plank Boards Kits    $fifty four.01/box
    • forty one rows at 11′ – 6″
    • About 500′ of boards (63 boards, three.5 box kits)
    • Include ten% a lot more boards for waist.  Fifty percent a box labored terrific for me.
  • (one) Gal. White Latex Paint                                                            $31
  • (ten) ten oz. DAP DYNAGRIP Adhesive                                      $four/ten oz.
  • (one) box one one/4″ Pin Nails                                                                 $ten/box
  • Whole Cost                                                                                 $261

Installing Whitewashed Boards On Basement Ceiling DAP DYNAGRIP

Resources Made use of:

Movie Coming Before long

Remain tuned for a video clip tutorial of this basement ceiling update. Subscribe to our YouTube channel and click on the bell to transform on the notifications!

Whitewashing and Installation Steps

one. Whitewash Boards Initially.

This will help you save you a great deal of time and headache if you do this initially.  I experienced improved control of the color when I took the time to whitewash the boards before I put in them.

How to Whitewash Knotty Pine Boards for DIY Basement Plank Ceiling

Dilute the paint of decision with drinking water. I made use of about 75% paint to 25% drinking water for this search. I didn’t want it to be as well white so I wiped it off, with a rag, proper following applying the paint with a brush. Allow that dry for a pair of hours then you can get started installing.

Linked Studying: Use this color washing approach to stain wood any color!

2. Thoroughly clean the Surface.

Wash the ceiling with a wet rag and some dish soap to clear away any dirt or dust.  This will assist the boards adhere to the ceiling when you glue them in spot.

You will also want to clear away the light fixtures to reinstall following your plank ceiling is put in. We took this possibility to swap the flush-mount “boob lights” with can lights and we adore the difference! More information about that coming in the video clip.

Go through a lot more about installing recessed can lights or see our picks for a lot more classy flush-mount fixtures listed here.

three. Mark All the Ground Joists or Ceiling Rafters.

In my circumstance, I was in the basement below the main amount of the house, so I identified all the ground joists with a stud finder and chalked a line across the home to determine the middle of each ground joist with a chalk line, so I could nail the boards to th
e ground joists guiding the drywall in the ceiling.

Mark Joists to Install Whitewashed Planks on Ceiling for Basement Ceiling Update

I have witnessed and investigated other approaches to installing boards on the ceiling, but I made a decision that just nailing and gluing to the ceiling was the ideal solution for me.  Our finished ceiling height devoid of the new boards was 7′-6″ and I didn’t want to make it as well significantly shorter with other approaches that I observed.

See how other DIYers have put in a plank ceiling in the kitchen area and in the attic, and a reclaimed wood plank ceiling in a bed room.

four. Get started initially row.

Get started on the longest wall in the back of the home, reverse of the doorway.  I ran the boards the length of the home, perpendicular to the doorway.  Lower the boards as you go with a miter observed.

Installing Whitewashed Knotty Pine Boards On Ceiling Tongue Toward Entry Of Room

Oriented the boards so the the tongue of the boards have been experiencing the entry of the home.  I needed to make absolutely sure that from the entry of the home you could not see into the gaps of the tongue and groove of the boards.

I utilized the DAP DYNAGRIP Adhesive to the back of the board

Installing Whitewashed Boards On Ceiling Glueing Boards

Then made use of the pin nailer to hold it in spot on the ceiling whilst the adhesive dries.  I nailed in to the edge of the tongue at and angle, to hide most of the nail heads.  Simply because I made use of a pin nailer most of the holes in which so modest it didn’t even mater as well significantly that they in which showing.

Installing Whitewashed Knotty Pine Boards On Ceiling Nailing With Pin Nailer

5. Offset the Finishes of the Boards

Offset the finishes of the boards at minimum 4″ from the earlier row.  You want to steer clear of lining up the finishes on each row as significantly as you can.  This will give you a nicer staggered search.

Installing Whitewashed Knotty Pine Boards On Ceiling Stagger Ends Of Boards

6. Repeat the Course of action Until finally the Ceiling is Completed

Repeat installing the tongue and groove planks until you have included the ceiling. The future video clip will incorporate how to measure and reduce around the holes for your lights, so be absolutely sure to subscribe to our YouTube channel to see that!

For the previous row of boards I ripped the boards to width with a table observed based on the remaining width I required to end it off.  I reduce off the tongue conclusion of the board.  You also have to clear away fifty percent of the groove up versus the ceiling in buy to glue this piece in spot.

Installing Whitewashed Knotty Pine Boards On Ceiling for a Basement Plank Ceiling

The moment the previous board is put in then you are done.  We still left the ceiling with whitewashed flat sheen search and we adore it.

Basement Whitewashed Knotty Pine Plank Wood Ceiling with Recessed Can Lighting

What do you consider?  Allow us know in the reviews below if a whitewashed knotty pine board ceiling is one thing you would like in your property. Please share and pin for afterwards!

More Diy ceiling updates:

How To Install A Whitewashed Plank Ceiling In A Basement #remodelaholic

DIY Basement Ceiling Update With Whitewashed Plank Wood Ceiling And Recessed Can Lights #remodelaholic

Remodelaholic is a participant in the Amazon Companies LLC Associates Program, an affiliate marketing application developed to deliver a means for sites to gain marketing expenses by marketing and linking to Please see our total disclosure listed here.

About Justin